If you have IT-Tests.com's Juniper JN0-694 exam training materials, we will provide you with one-year free update. This means that you can always get the latest exam information. As long as the Exam Objectives have changed, or our learning material changes, we will update for you in the first time. We know your needs, and we will help you gain confidence to pass the Juniper JN0-694 exam. You can be confident to take the exam and pass the exam.
IT-Tests.com's Juniper JN0-694 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of IT-Tests.com, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.
Please select our IT-Tests.com to achieve good results in order to pass Juniper certification JN0-694 exam, and you will not regret doing so. It is worth spending a little money to get so much results. Our IT-Tests.com can not only give you a good exam preparation, allowing you to pass Juniper certification JN0-694 exam, but also provide you with one-year free update service.
If you attend Juniper certification JN0-694 exams, your choosing IT-Tests.com is to choose success! I wish you good luck.
Exam Code: JN0-694
Exam Name: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 36 Questions and Answers
Last Update: 2013-12-04
Some sites provide Juniper JN0-694 exam study materials on the Internet , but they do not have any reliable guarantee. Let me be clear here a core value problem of IT-Tests.com . All Juniper exams are very important. In this era of rapid development of information technology, IT-Tests.com just questions provided by one of them. Why do most people choose IT-Tests.com? This is because the exam information provided by IT-Tests.com will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.
In order to meet the request of current real test, the technology team of research on IT-Tests.com Juniper JN0-694 exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect IT-Tests.com Juniper JN0-694 exam materials. This allows IT-Tests.com to always have the materials of highest quality.
JN0-694 (Enterprise Routing and Switching Support, Professional (JNCSP-ENT)) Free Demo Download: http://www.it-tests.com/JN0-694.html
NO.1 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C
Juniper JN0-694 answers real questions JN0-694 JN0-694 JN0-694 braindump JN0-694 certification training
NO.2 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C
Juniper exam prep JN0-694 study guide JN0-694 JN0-694 questions JN0-694 exam
NO.3 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D
Juniper practice test JN0-694 JN0-694 JN0-694 dumps JN0-694 JN0-694 exam dumps
NO.4 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D
Juniper practice test JN0-694 braindump JN0-694 practice test
NO.5 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D
Juniper braindump JN0-694 JN0-694 exam dumps JN0-694 dumps
NO.6 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A
Juniper JN0-694 JN0-694 certification JN0-694 JN0-694 JN0-694
NO.7 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D
Juniper test questions JN0-694 JN0-694 JN0-694
NO.8 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D
Juniper exam JN0-694 JN0-694 exam dumps JN0-694 pdf JN0-694 exam dumps
IT-Tests.com offer the latest ACMA_6.1 Questions & Answers and high-quality HP0-J60 PDF Practice Test. Our HP0-J63 VCE testing engine and 70-465 study guide can help you pass the real exam. High-quality VCP-510 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/JN0-694.html
没有评论:
发表评论