2013年12月27日星期五

JuniperのJN0-303認定試験の問題集

JPexamの専門家チームは彼らの経験と知識を利用して長年の研究をわたって多くの人は待ちに待ったJuniperのJN0-303認証試験について教育資料が完成してから、大変にお客様に歓迎されます。JPexamの模擬試験は真実の試験問題はとても似ている専門家チームの勤労の結果としてとても値打ちがあります。

今は時間がそんなに重要な社会でもっとも少ないお時間を使って試験に合格するのは一番よいだと思います。JPexamが短期な訓練を提供し、一回に君の試験に合格させることができます。試験に失敗したら、全額で返金いたします。

試験番号:JN0-303問題集
試験科目:Juniper networks Certified internet specialist.m(jncis-m)
最近更新時間:2013-12-27
問題と解答:全150問
100%の返金保証。1年間の無料アップデート。

JPexamのJN0-303問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。Juniper試験の重要なの一環として、JN0-303認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。JPexamは試験に失敗した場合は全額返金を約束しますから、JN0-303試験に合格することができるように、はやくJPexamのウェブサイトに行ってもっと詳細な情報を読んでください。

JN0-303認定試験について、あなたはどうやって思っているのですか。非常に人気があるJuniperの認定試験の一つとして、この試験も大切です。しかし、試験の準備をよりよくできるために試験参考書を探しているときに、優秀な参考資料を見つけるのはたいへん難しいことがわかります。では、どうしたらいいでしょうか。大丈夫ですよ。JPexamはあなたの望みを察して、受験生の皆さんの要望にこたえるために、一番良い試験JN0-303問題集を提供してあげます。

JuniperのJN0-303認定試験に受かるのはあなたの技能を検証することだけでなく、あなたの専門知識を証明できて、上司は無駄にあなたを雇うことはしないことの証明書です。当面、IT業界でJuniperのJN0-303認定試験の信頼できるソースが必要です。JPexamはとても良い選択で、JN0-303の試験を最も短い時間に縮められますから、あなたの費用とエネルギーを節約することができます。それに、あなたに美しい未来を作ることに助けを差し上げられます。

IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにJuniperのJN0-303認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。JPexamのJuniperのJN0-303試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。

JPexamは専門的に IT認証試験に関する資料を提供するサイトで、100パーセントの合格率を保証できます。それもほとんどの受験生はJPexamを選んだ理由です。JPexamはいつまでも受験生のニーズに注目していて、できるだけ皆様のニーズを満たします。 JPexamのJuniperのJN0-303試験トレーニング資料は今までがないIT認証のトレーニング資料ですから、JPexamを利用したら、あなたのキャリアは順調に進むことができるようになります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/JN0-303_exam.html

NO.1 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper過去問   JN0-303認定証   JN0-303   JN0-303認証試験   JN0-303   JN0-303

NO.2 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper   JN0-303   JN0-303過去問

NO.3 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper   JN0-303練習問題   JN0-303認定証

NO.4 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper   JN0-303参考書   JN0-303練習問題

NO.5 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper   JN0-303   JN0-303練習問題   JN0-303認定資格

NO.6 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper過去問   JN0-303   JN0-303過去問   JN0-303

NO.7 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper   JN0-303練習問題   JN0-303   JN0-303参考書   JN0-303

NO.8 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper認定証   JN0-303問題集   JN0-303問題集   JN0-303認定試験   JN0-303認証試験   JN0-303過去問

NO.9 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper参考書   JN0-303問題集   JN0-303認定資格

NO.10 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper認定試験   JN0-303認定資格   JN0-303   JN0-303   JN0-303   JN0-303認証試験

NO.11 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper認定資格   JN0-303認証試験   JN0-303練習問題   JN0-303   JN0-303

NO.12 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper認定証   JN0-303認定資格   JN0-303参考書

NO.13 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper過去問   JN0-303練習問題   JN0-303認証試験

NO.14 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper   JN0-303   JN0-303過去問   JN0-303過去問   JN0-303

NO.15 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303練習問題   JN0-303認定証   JN0-303   JN0-303   JN0-303

NO.16 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper   JN0-303練習問題   JN0-303過去問

NO.17 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper   JN0-303   JN0-303

NO.18 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper   JN0-303   JN0-303   JN0-303認定資格   JN0-303過去問

NO.19 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper   JN0-303   JN0-303

NO.20 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper参考書   JN0-303練習問題   JN0-303認定試験   JN0-303

JPexamは最新のHP2-Z27問題集と高品質のHP5-T01D問題と回答を提供します。JPexamの000-657 VCEテストエンジンとE20-555試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の156-215.13 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/JN0-303_exam.html

没有评论:

发表评论