JPexamのMB7-515問題集は的中率が高いですから、あなたが一回で試験に合格するのを助けることができます。これは多くの受験生たちによって証明されたことです。ですから、問題集の品質を心配しないでください。これは間違いなくあなたが一番信頼できるMB7-515試験に関連する資料です。まだそれを信じていないなら、すぐに自分で体験してください。そうすると、きっと私の言葉を信じるようになります。
MicrosoftのMB7-515認定試験に受かるためにがんばって勉強していれば、JPexamはあなたにヘルプを与えます。JPexam が提供したMicrosoftのMB7-515問題集は実践の検査に合格したもので、最も良い品質であなたがMicrosoftのMB7-515認定試験に合格することを保証します。
進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くJPexamのMicrosoftのMB7-515試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。
JPexamのMB7-515 問題集はあなたがMB7-515認定試験に準備するときに最も欠かせない資料です。この問題集の価値は試験に関連する他の参考書の総合の価値に相当します。このアサーションは過言ではありません。JPexamの問題集を利用してからこのすべてが真であることがわかります。
試験番号：MB7-515問題集
試験科目：NAV 5.0 Financials
最近更新時間：2014-03-10
問題と解答：全210問
100％の返金保証。1年間の無料アップデート。
現在、IT業界での激しい競争に直面しているあなたは、無力に感じるでしょう。これは避けられないことですから、あなたがしなければならないことは、自分のキャリアを護衛するのです。色々な選択がありますが、JPexamのMicrosoftのMB7-515問題集と解答をお勧めします。それはあなたが成功認定を助ける良いヘルパーですから、あなたはまだ何を待っているのですか。速く最新のJPexamのMicrosoftのMB7-515トレーニング資料を取りに行きましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/MB7-515_exam.html
NO.1 Dimension Priorities for Sales Journal entries are set as "2" for the Item table and "1" for the Customer
table. What is the effect?
A. If the Dimension code has a value from the Customer Table and the Item Table, then the Customer
table takes priority.
B. If the Dimension code has a value from the Item Table and the Customer Table, then the Item Table
takes priority.
C. The program will resolve the conflict in favor of the last entered account.
D. The Item Table always takes precedence.
Answer: A
Microsoft認定試験 MB7-515認定試験 MB7-515過去問
NO.2 The primary balance sheet G/L Account associated with the Customer Posting Group is:
A. Accounts Receivable
B. Revenue
C. Accounts Payable
D. Vendors
Answer: A
Microsoft MB7-515 MB7-515 MB7-515 MB7-515参考書
NO.3 If you want to post a recurring journal entry on the last day of every month, how can you fill in the
Recurring Frequency field in the recurring journal?
A. 1M+1D
B. 1M
C. 1M+CM
D. CM+1D
Answer: C
Microsoft練習問題 MB7-515 MB7-515過去問
NO.4 Which dimension feature needs to be set up to prevent the posting of the "LARGE" Business Group
dimension value with the "HOME" Customer Group dimension value?
A. Default dimension priorities
B. Global Dimensions
C. Value Posting Rules
D. Dimension Combinations and Dimension Value Combinations
Answer: D
Microsoft参考書 MB7-515練習問題 MB7-515 MB7-515参考書 MB7-515
NO.5 Your client wants all posted customer entries to contain the SALES Department Code. You can
achieve this by using which of the following?
A. Dimension Combinations
B. Analysis Views
C. Account Type Default Dimensions
D. Default Dimension Priorities
Answer: C
Microsoft認定試験 MB7-515 MB7-515 MB7-515認証試験 MB7-515
NO.6 What field must equal zero before you can post a General Journal?
A. Balance
B. Balance Account No.
C. Total Balance
D. Amount
Answer: C
Microsoft MB7-515 MB7-515
NO.7 What is the minimum acceptable level of security that requires that each user is assigned an ID and a
password?
A. Record level security
B. Company level security
C. Table level security
D. Database level security
Answer: D
Microsoft MB7-515 MB7-515 MB7-515
NO.8 If you choose the "Variable" Recurring Method on a Recurring Journal, which one of the following
describes how Microsoft Dynamics NAV will process the journal?
A. The Amount field on the journal will be changed to zero after posting.
B. The balance of the account you select will be automatically entered in the Amount field and will be
changed to zero after posting.
C. The Amount field on the journal will be changed to zero after posting, and a reversing entry will be
posted the following day.
D. The Amount field will remain the same after posting.
Answer: A
Microsoft参考書 MB7-515認定試験 MB7-515認証試験 MB7-515認定資格
NO.9 How are menus assigned to users?
A. While in the standard window, right-click the menu button of the menu that you want to assign, and
then click Assign Users.
B. While in the Navigation Pane Designer, right-click the menu button of the menu that you want to assign,
and then click Properties.
C. While in the standard window, right-click the menu button of the menu that you want to assign, and
then click Assign.
D. While in the Navigation Pane Designer, right-click the menu button of the menu that you want to assign,
and then click Assign Users.
Answer: D
Microsoft MB7-515 MB7-515 MB7-515認証試験 MB7-515参考書
NO.10 Choosing the "Limited" option in Dimension Combination Setup allows which of the following?
A. The Dimension combination is always allowed on entries.
B. The Dimension combination is allowed in only certain circumstances.
C. The Dimension combination is allowed in only certain circumstances, and the values are defined.
D. The Dimension combination is allowed on every entry.
Answer: C
Microsoft MB7-515 MB7-515認定資格 MB7-515認定試験
NO.11 When you have selected the Recurring Method of Reversing Fixed on a recurring journal line, the
program will post a reversing entry on what date?
A. The Posting Date + one month
B. The same date as the Posting Date on the journal line
C. The date after the Posting Date on the journal line
D. The Posting Date + the date formula in the Recurring Frequency field
Answer: C
Microsoft認定試験 MB7-515 MB7-515認証試験 MB7-515認定試験
NO.12 General Business Posting Groups are: Choose the 2 that apply.
A. Set up in the Financial Management area
B. Assigned to Vendor Cards
C. Assigned to Item Cards
D. Assigned to Resource Cards
Answer: AB
Microsoft MB7-515 MB7-515
NO.13 For LCY Conversion Rounding to take place, the following accounts need to be set up in the Currency
Card:
A. Realized Losses Account, Unrealized Losses Account
B. Conv. LCY Rounding Debit Account, Max. VAT Difference Allowed
C. Conv. LCY Rounding Debit Account, Conv. LCY Rounding Credit Account
D. Conv. LCY Rounding Credit Account, Max. VAT Difference Allowed
Answer: C
Microsoft MB7-515 MB7-515練習問題 MB7-515認定証 MB7-515過去問 MB7-515
NO.14 You are about to implement a new Microsoft Dynamics NAV installation by using the RIM Toolkit. The
customer is a small furniture manufacturing company with two years in business. The company has not
used an ERP system before, and legacy data is available in Microsoft Excel format. Which of the following
overall RIM processes do you follow to achieve the fastest implementation?
A. Have the customer complete a "Furniture" setup questionnaire, create a new generic company,
prepare data templates, and migrate legacy data by means of Excel files.
B. Create a new company based on the "Furniture" company type, prepare data templates, migrate
legacy data by means of Excel files, and enter setup data.
C. Have the customer complete a "Furniture" setup questionnaire, create a new company based on the
"Furniture" company type, import and apply questionnaire
Answers, prepare data templates, and migrate legacy data by means of XML.
D. Have the customer complete a "Furniture" setup questionnaire, create a new company based on the
"Furniture"
company type, import and apply questionnaire
Answers, prepare data templates, and migrate legacy data by means of
Excel.
Answer: D
Microsoft MB7-515 MB7-515 MB7-515
NO.15 Your client wants the program to automatically assign a set of dimensions to every transaction posted
for a specific customer. This is achieved by setting up:
A. Dimension Combinations
B. Default Dimensions
C. Dimension Value Combinations
D. Shortcut Dimensions
Answer: B
Microsoft過去問 MB7-515 MB7-515 MB7-515問題集
NO.16 What is the effect of using the Insert Conv. LCY Rndg. Lines function in journals?
A. The function replaces all currency amounts in the journal with LCY amounts.
B. The function posts rounding differences to a currency residual account.
C. The function inserts a foreign currency journal line that ensures that the journal is balanced both in
foreign currency and LCY.
D. The function inserts an LCY journal line that ensures that the journal is balanced both in foreign
currency and LCY.
Answer: D
Microsoft参考書 MB7-515 MB7-515問題集 MB7-515練習問題 MB7-515認定資格
NO.17 What technique does Microsoft Dynamics NAV use to allow multiple users access to the database at
the same time?
A. Database-version principle
B. Database redundancy
C. Read concurrency
D. Read consistency
Answer: A
Microsoft過去問 MB7-515 MB7-515練習問題 MB7-515参考書 MB7-515練習問題 MB7-515
NO.18 Which RIM Toolkit elements help to structure new data? Choose the 2 that apply.
A. Setup questionnaire
B. Industry-specific setup data
C. Data templates
D. Data migration files
Answer: BC
Microsoft MB7-515 MB7-515
NO.19 Which of the following statements is TRUE about dimensions?
A. All dimensions are stored directly on the G/L entries.
B. Only global dimensions are stored directly on the G/L entries.
C. Only budget dimensions are stored directly on the G/L entries.
D. Only shortcut dimensions are stored directly on the G/L entries.
Answer: B
Microsoft MB7-515参考書 MB7-515過去問 MB7-515 MB7-515 MB7-515参考書
NO.20 What is the result of blocking a Dimension Code?
A. Prevents further posting using the Dimension code
B. Prevents viewing of data with the Dimension code
C. Prevents further posting to the Dimension code and restricts viewing of data containing that Dimension
code
D. Removes Dimension code data from the program
Answer: A
Microsoft過去問 MB7-515認証試験 MB7-515練習問題 MB7-515認定資格
JPexamは最新のHP3-C29問題集と高品質の70-414問題と回答を提供します。JPexamのC2040-442 VCEテストエンジンとHP2-N40試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の700-039 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论