JPexamは専門的な、受験生の皆さんを対象とした最も先進的なIBMの000-197試験の認証資料を提供しているサイトです。JPexamを利用したら、IBMの000-197試験に合格するのを心配することはないです。
もう既にIBMの000-197認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはJPexamの000-197問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、000-197認定試験に合格することができます。
難しい000-197認定試験に合格したいなら、試験の準備をするときに関連する参考書を使わないとダメです。自分に合っている優秀な参考資料がほしいとしたら、一番来るべき場所はJPexamです。JPexamの知名度が高くて、IT認定試験に関連するいろいろな優秀な問題集を持っています。それに、すべての000-197試験問題集に対する無料なdemoがあります。JPexamの000-197問題集があなたに適するかどうかを確認したいなら、まず問題集のデモをダウンロードして体験してください。
試験番号：000-197問題集
試験科目：PSeries Enterprise Technical Support
最近更新時間：2014-02-12
問題と解答：全101問
100％の返金保証。1年間の無料アップデート。
どのようにすればもっと楽にIBMの000-197認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、JPexamの000-197問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。
JPexam はIT業界に認定試験大綱の主要なサプライヤーとして、専門家は一緻して品質の高い商品を開発し続けています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/000-197_exam.html
NO.1 A system administrator wants to move the media drawer CD-ROM on a p670 dynamically between two
active partitions using the HMC. What steps are required to perform this task?
A.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group U1.1.9-P1-15 for CD-ROM
3) Select to and from in Dynamic Reconfiguration, click move
B.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group U1.1.18-P1-I10 for CD-ROM
3) Select to and from in Dynamic Reconfiguration, click move
C.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group 128 for CD-ROM location
3) Select to and from in Dynamic Reconfiguration, click move
D.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group 128 slot 5 for CD-ROM location
3) Select to and from in Dynamic Reconfiguration, click move
Answer: B
IBM参考書 000-197 000-197参考書 000-197認証試験
NO.2 In an AIX 5.1 POWER4 LPAR system, the system administrator wants to use an external CD-ROM
that is currently assigned to another partition. What steps are required to accomplish this task?
A.Dynamically allocate the CD-ROM from the old partition to the new partiton using the Dynamic
Reconfiguation Menu.
B.Stop the old partition and the new partition,add the PCI slot to the new partition profile using Dynamic
Reconfiguration Menu, Active both profiles and reboot.
C.Remove the PCI slot from the old profile using dislot, add the PCI slot to the new partition profile using
the Dynamic Reconfiguration Menu, activate the new profile reboot.
D.Stop the partition where tHE CD-ROM is currently assigned, remove the PCI slot from the old profile,
reboot the partition, add the PCI slot to the the new partition profile, activate the new profile.
Answer:D
IBM 000-197認定資格 000-197
NO.3 A customer has a p690 system running AIX 5.1 Configured in LPAR mode. The disk vendor sent a new
firmware CD-ROM that needs to be applied immediatedly. The disk vendor is planning to send their
service representative to accomplish this task. What does the system administrator need to do to prepare
for the service reprsentative without affecting other LPARs?
A.Reassign the media bay from an LPAR
B.Hot swap the interal CD-ROM device between LPARs
C.Attach an external CD-ROM Device via hot swap SCSI controller to an LPAR
D.Dynamically reassign the internal CD-ROM to this LPAR
Answer:C
IBM 000-197練習問題 000-197 000-197問題集 000-197
NO.4 The HMC "Contents area" displays the system operating state as "incomplete" What should be done to
correct this problem?
A. Rebuild the managed system
B. Hard reset the partition profile
C. Soft reset the partition profile
D. Select the managed system icon and choose recover partition data
Answer: A
IBM認定資格 000-197 000-197過去問 000-197
NO.5 What is required for Dynamic LPAR on a POWER4 system?
A.AIX 5L Version 5.2, Hardware Management Consloe. An Ethernet connection between the HMC and
the primary partition on the pSeries server
B.AIX 5L Version 5.1, Hardware Management Consloe. An Ethernet connection between the HMC and
each active partition on the pSeries server
C.AIX 5L Version 5.2, Hardware Management Consloe. A serial connection to the HMC An Ethernet
connection between the HMC and HMC and each active partition on the pSeries server
D.AIX 5L Version 5.1, Hardware Management Consloe. A serial connection to the HMC An Ethernet
connection between the HMC and HMC and each active partition on the pSeries server
Answer:C
IBM 000-197 000-197練習問題 000-197 000-197
NO.6 The function Rebuild Managed System can be used to do which of the following?
A. Refresh the NVRAM from the current HMC settings
B. Clear out all the defined partitions from NVRAM
C. Clear out all the defined partitions from the HMC
D. Refresh the HMC from the NVRAM settings
Answer: D
IBM認定試験 000-197 000-197参考書
NO.7 A Customer has multiple system administrators managing and monitoring the p690 system. The
customer would like to establish authority for these administrators to create and manage LPARs. Which of
the following is the correct authority level on the HMC?
A.User Administrator
B.Root
C.Operator
D.Advanced Operator
Answer:D
IBM 000-197練習問題 000-197参考書 000-197認証試験 000-197
NO.8 A company wants to partition a newly purchased p690 system. The system has AIX 5.1 with 16 CPUs,
32GB of memory and two I/O drawers. What is the maximum number of partitions that can be configured
with greater than 16GB memory?
A.0
B.1
C.2
D.3
Answer: A
IBM認定証 000-197 000-197認定資格
NO.9 A customer has an 8-way POWER4 p650 system. They have one partition running AIX 5.2, two
partitions running AIX 5.1, and one partition running Linux. What is the procedure to move processors
between partitions?
A.Create new profiles on the HMC for the partitions to be moved. The new profiles will be dynamically
activated.
B.Create new profiles on the HMC for the partitions to be moved. Shut down both currently active
profiles.Manually select and activate the new profiles.
C.Use the grahical user interface or command-lind function of the HMC to dynamically move the
resources from any of the partitions to the AIX 5.2 partition
D.Use the graphical user interface or command-line function of the HMC to dynamically move the
resources from one of the AIX 5.1 partitions to the AIX 5.2 partition.
Answer:B
IBM認定試験 000-197認定試験 000-197 000-197問題集
NO.10 A customer has a 16-way P690 with 32GB of memory. While doing performance testing on an 8-way
partition, the sar-PALL 15 command shows that there are only 6 CPUs active. The profile has both the
desired and minium number of CPUs set to 8. The other 8 CPUs are allocated to other partitions that are
active.
Which of the following statements is the most likely cause of this situation?
A.The partition was started with a minimum set of 6 CPUs
B.Dynamic CPUs dealiocation detected error in the CPU and disbled them
C.There is not enough contiguous memory to support 8 CPUs in the partition
D.There were not enough CPUs because of the order in which the partitions were started
Answer:B
IBM認定試験 000-197 000-197過去問 000-197練習問題
NO.11 A company wants to add as much redundancy to their systems as possible. What PCI-X adapter can be
hot-plugged?
A. An ESCON adapter
B. An adapter supporting the SP Switch
C. A fiber channel adapter connected to the SAN
D. A graphics adapter supporting the system console
Answer: C
IBM 000-197 000-197 000-197
NO.12 What task must be done immediately before upgrading the software on the HMC to save the system
performance?
A.Save upgrade data
B.Backup critical console data
C.Backup system profiles to diskette
D.Save system preferences from CEC properties
Answer:A
IBM認定試験 000-197 000-197 000-197認定資格 000-197練習問題
NO.13 which of the following options may NOT be used to install AIX system maintenance(PTFs) in a
partitioned environment?
A.Use NIM to install the PTF images to the partition over the network.
B.Use the software Maintenance function of the HMC to install the PTFs
C.ALLOcate the CD-ROM device to the partition and install from the PTF media.
D.Use Smitty update-all from a common NFS mount point cotain the bifurcated PTF images.
Answer:B
IBM 000-197 000-197認定試験 000-197
NO.14 In a high performance computing environment. If an 8GB and a 32GB memory card is installed in the
MCM# memory slots, what is the performance result?
A.The two cards are treated independently with the data on the application being handled 50/50 across
the L3 cache.
B.The two cards are treated independently with the data on the application being handled 20/80 across
the L3 cache.
C.Any tow memory cards can be installed in the MCM# memory slot without problems as long as they are
installed in pairs.
D.The two cards are treated as one memory store, with the data for an application being handled 50/50
across the L3 cache.
Answer:B
IBM 000-197 000-197参考書
NO.15 A customer has received an HMC software upgrade package from IBM. Which course of action needs
to be followed at this point?
A.Backup the HMC via the DVD-RAM and install corrective service.
B.Reinstall the HMC using the upgrade media that was received
C.Place a servive call to IBM.
D.Select Service Focal Point from the HMC and apply maintenance
Answer:A
IBM 000-197参考書 000-197
NO.16 A mixed server environment is running AIX version 4.3 and AIX 5.2 that has 32-bit and 64-bit
applications. What needs to be explained to the customer for them to understand what can be run on the
AIX 5.2 64 bit kernel?
A.32-bit and 64-bit applications that were compiled under AIX 4.3 will not run AIX 5.2 systems with 64-bit
kernel.
B.32-bit applications that were compiled under AIX Version 5.1 will not run on AIX 5.2 with a 64-bit kernel
64-bit applications compiled on AIX 4.3 will run on the AIX 5.2 64-bit kernet.
C.64-bit applications that were compliled under AIX Version 4.3 need to be recompiled in order to run
under AIX 5.2 32-bit applications compiled under AIX 5.1 on either 32-bit or 64-bit processor models will
run without recompilation
D.64-bit applications that were compliled under AIX Version 4.3 need to be recompiled in order to run
under AIX 5.2 32-bit applications compiled under AIX 5.1 on 32-bit processor models need to be
recompiled to run on a 64-bit processor.
Answer:C
IBM過去問 000-197 000-197
NO.17 A customer planning to order a p670/p690 system is informed by the site engineer that due to hight
restrictions, the machine will not fit through the door. Which planning option best accommodates
movement of the p670/690 system through the existing data center doorway?
A.Dismantle the top on site
B.Tilt the machine on its side
C.Disassemble the data center entrance door
D.Order the Top Hat hight reducation option
Answer:D
IBM 000-197 000-197問題集 000-197 000-197認定資格
NO.18 Which of the following methods can be used to identify which CPUs have been allocated to particular
running partitions?
A.Run the isdv-Cc processor command from the AIX command line in the partition.
B.View the CPU properties for the Managed System from HMC.
C.For each processor run the isattr-Elprocx command.
D.Use the blindprocessor-q command
Answer:B
IBM認定資格 000-197 000-197 000-197 000-197
NO.19 Which of the following options are available to remotely manage the HMC?
A.Establish a ssh session with HMC
B.Establish a telent session with HMC
C.Activate the rexec and rsh features on the HMC
D.Install the Trusted Compulting Based and Secure Socket Protocol
Answer:A
IBM参考書 000-197過去問 000-197
NO.20 A customer is interested in assigning the devices located in the front and back of the media drawer of
the p670 to multiple LPARs. What should be the suggested configuration?
A. Media drawer front and back connected to dual ported SCSI adapter
B. Media drawer front and back connected to single ported SCSI adapter
C. Media drawer front and back connected to integrated SCSI adapter
D. Media drawer front and back assigned to an empty slot in I/O drawer one
Answer: B
IBM認定試験 000-197 000-197 000-197
JPexamは最新の700-410問題集と高品質のC_TBW45_70問題と回答を提供します。JPexamのC_TFIN52_64 VCEテストエンジンと700-501試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_TBIT44_731 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论